Below is a useful list of Improvements and fixes added to the current release.
Woodwork for Inventor 11.1.0 (Release date: 2020-12-08)
- Improved – Sketch selection for Milling contour specifying.
- Fixed – Vault 2021 connection issue from Woodwork for Inventor BOM.
- Fixed – Wrong quantity calculation by keyword {Item.QuantityExtendedHierarchy}.
- Fixed – Not all data was stored using the Header command in the BOM editor.
- Fixed – Header data was not transferred to iProperties.
- Fixed – Keywords {Item.FillWorkpiece.LengthUnderscore},{Item.FillWorkpiece.WidthUnderscore} are returned.
- Fixed – Wrong underscore by {Item.FillWorkpiece.LengthUnderscore},{Item.FillWorkpiece.WidthUnderscore} keywords, when texture direction was turned 90 degree.
- Fixed – iBox cannot be inserted when it has read-only status.
- Fixed – Purchased type Assembly components were committed to Vault as Assembly component.
- Fixed – Some problems with associative and regular sculpting function command.
- Fixed – Incorrect operation ordering by Auto CNC.
- Fixed – It was not possible to delete unnecessary veneer and edge band thickness in the Woodwork for Inventor Material Editor.
- Fixed – It was not possible to change the veneer thickness in the Multilayer Board Editor.
- Fixed – Wrong units output in Mark Cover command.
- Fixed – Auto Plot Exception when blind holes from top and bottom sides are coincident.
- Fixed – Did not transfer hardware code replacement values when drawings were generated by Auto Plot.
- Fixed – Part Number did not change when iBox was inserted.
- Fixed – iBox publishing when it contains iBox inside.
- Fixed – iBox refreshing issues.
- Fixed – Edge Band wizard malfunctioned Material replacement function.
- Fixed – Selection of all faces in the DressUp command crashed Inventor.
- Fixed – Issues with grain direction control.
- Fixed – License disappearing after midnight.
- Added – A new feature which lets you select which representation to use then plotting drawings.
Woodwork for Inventor 11.0.2 (Release date: 2020-06-03)
- Improved – When performing adaptive re-sculpt, hardware that already has adaptive sculpt, will be ignored.
- Improved – Small improvements in postprocessors.
- Fixed – Now it is possible to insert iBox with read-only status.
- Fixed – If the assembly has adaptive sculpt performed, and the configuration of the component in it has been changed, it was not possible to perform re-sculpt.
- Fixed – Small fixes in keyword constructor and parser.
- Fixed – Small errors in keyword constructor and parser.
- Fixed – In some cases when creating part list type BOM, generated excel had assembly information added.
- Fixed – Small bugs in CNC file generation.
- Fixed – Small issues in the simulator.
Woodwork for Inventor 11.0.1 (Release date: 2020-05-18)
- Improved – User is warned, that material replacements which was made individually to the part, are not saved.
- Improved – AutoCNC displays a message for the Nesting operation that the spindle has not been set, even though such a setting has been made.
- Fixed – iBox insertion, when iBox top assembly is set as “Reference” BOM type.
- Fixed – A situation where a component has multiple instances and participates in different Sculpts
- Fixed – In certain situations, while inserting iBox, its component relations are incorrectly copied.
- Fixed – After model geometry modification and AutoPlot Refresh, the new Ordinate Dimension reference point position was not refreshed.
- Fixed – AutoPlot drawing refresh, during which the user-specified dimensions for holes, that represent associative Sculpt feature, was erased.
- Fixed – Situation when Assembly Copier Copy/Reuse status does not switch.
- Fixed – Incorrect saw operation post-processing depth for inclined surfaces when incline angle is small.
- Fixed – Processing slant milling operation processing for Maestro post-processor.
- Fixed – After sizing in AutoCNC oversize is applied double processing of the same surfaces is avoided.
- Fixed – The CNC Simulator on Mill Operation did not follow the Stepover instruction.